A retractable hose reel is equipment that makes it easier t. It does that in various ways, depending on the type of hose reel. It has high-quality springs and a locking mechanism that secures the hose at the required length, preventing tangles. There are many types of hose reels available in the market, each with its unique characteristics. The retractable reel qualities make it more expensive than others, but it gives the best gardening experience. In this write-up, we look at ways of rewinding a hose reel.
Ways of Rewinding a Hose Reel
There are three ways of rewinding a hose reel. These are spring rewind, powered motor rewind, and manual crank.
1. Spring Rewind
It is also known as automatic spring retractable. It is a quick and straightforward method suitable for hoses with short lengths. When the hose is pulled out to its required size and secured by a latch, it applies tension on a spring. After the process, a short tug releases the latch, and the spring’s tension enables the hose to retract back on the reel. Most people prefer this process since it doesn’t require much effort. It is ideal for operations that need a hose with a high winding and unwinding frequency.
Spring rewinding can be done using reels mounted on various positions in different locations and still have maximum impact. It can be on a ceiling, wall, ground, or in a vehicle. One limitation of this method is that the ultimate hose a spring reel can accommodate is 30 meters by 25mm for it to succeed.
2. Powered Motor Rewind
You can use the process for all applications, provided power is present. It is mainly used for large or longer hoses that would be difficult to wind manually. Jobs that require intensive winding and unwinding would benefit from applying this method. Unlike spring rewinding, this process needs the owner or operator to put in minimal work to retract the hose fully. One limitation of this process is that a power supply must be available for it to take place. If there is a power shortage, you can use a manual rewind reel for backup.
3. Manual Crank Rewinding
Rewinding is done by manually turning a handle attached to the drum, rolling the hose onto it. Longer lengths of hose, up to 60metres, can be rewound depending on who facilitates the process, as it can be tiring. Manual rewinding is economical due to the limited moving parts, and minimal damage is likely to occur. People in areas with no power supply can use this operation and store their hoses in an organized way. On the downside, this process consumes so much time, limiting productivity, and is labor-intensive, especially when involving large hoses.
Bottom Line
The kind of retractable hose reel you choose determines how it will rewind a hose. Each method has advantages and disadvantages, which can help you weigh your options and decide what you can handle and what you cannot.